现在位置:产品资讯>影像处理>AA88368  







AA88368- 10 Bit DAC
Block Diagram
 


Data Sheet
Package:TSSOP16L
详细型录,请连络我们


所有产品
回到首页



General Description
The AA88368 is an 10-bit resolution digital to analog converter (DAC), designed for interface with 10
bits micro-controller. The AA88368 has 10 channels with operational amplifier output buffers. Digital
data are input serially in max. 10MHz by individual channel units. The latched digital data are converted
into analog DC voltages by the D/A converter in 20μs settling time. AA88368 is a single 5V power DAC.
Output could be full swing as the analog power is equal to the system power. applications.

Features
.14 bits serial data input (3 wire serial data transfer method, DI, CLK, LD)
.R-2R resistor ladder used for D/A conversion
.10 channels with 10 bits resolution monotonic D/A converter
.10channel buffer operational amplifiers operating in the full voltage range from VCC to GND
.Max. +/- 3.5 LSBs Integral Non-Linearity
.Max +/- 1 LSB Differential Non-Linearity
.Max. 10 MHz Serial data input
.Serial I/O for cascade application
.Max. 2.0 mA analog output drive/sink current
.Two separate power supply/ground lines for system and analog power supply
.Single +5 V system power supply
.Silicon-gate CMOS process

Applications
.Cable set-top boxes(STB)
.Video amplifiers
.Portable and handheld products
.Video on demand(VOD)
.Personal video recorders(PVR)
.Communications devices
.DVD players
.SDTVs